Benq Projector SP840 Manuel D’Utilisation
Operation
32
English
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the remote control
• Using the remote control
1.
Press Zoom +/- to display the Zoom bar.
2.
Press Zoom + to magnify the center of the picture. Press the key
repeatedly until the picture size is suitable for your need.
3.
Use the directional arrows ( , , , ) on the projector or remote
control to navigate the picture.
4.
To restore the picture to its original size, press AUTO. You can also
press Zoom -. When the key is pressed again, the picture is further
reduced until it is restored to the original size.
• Using the OSD menu
1.
1.
Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.
2.
Press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar
displays.
3.
Repeat steps 2-4 in the section "Using the remote control" above. Or if you are using
the projector control panel, continue to the following steps.
4.
Press on the projector repeatedly to magnify the picture to a desired size.
5.
To navigate the picture, press MODE/ENTER to switch to the paning mode and
press the directional arrows ( , , , ) to navigate the picture.
press the directional arrows ( , , , ) to navigate the picture.
6.
To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out
functionality, and press AUTO to restore the picture to its original size. You can also
press repeatedly until it is restored to the original size.
press repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
picture while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. For SP840, the default
aspect ration is 16:9. Most analog TV and computers are in 4:3 ratio, and digital TV and
DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):
1.
To change the projected image ratio (no matter what aspect the source is):
1.
Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.
2.
Press
to highlight Aspect Ratio.
3.
Press / to select an aspect ratio to suit the format of the video signal and your
display requirements.