Benq Projector SP840 Manuel D’Utilisation

Operation

43

 allow you to manage the projector from a computer using a web

browser when the computer and the projector are properly connected to the same local 

area network.

1.

Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector 

and the other end to the RJ45 port.

2.

Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Advanced 

menu is highlighted.

3.

Press   to highlight Lan Control Settings and press MODE/ENTER. The Lan 
Control Settings

 page displays.

4.

Press   to highlight Control By and press  /  to select RJ45.

5.

Press   to highlight DHCP and press  /  to select On.

6.

Press   to highlight Apply and press MODE/ENTER.

7.

Re-enter the Lan Control Settings page. The Projector IP Address, Subnet Mask, 
Default Gateway

, and DNS Server settings will display. Note down the IP address 

displayed in the Projector IP Address row.

Back