Benq Projector SP840 Manuel D’Utilisation
Maintenance
60
English
11. Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12. After the startup logo, open the On-Screen
Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced
SETUP: Advanced
> Lamp Settings
menu. Press MODE/ENTER. The Lamp
Settings
Settings
page displays. Press to
highlight Reset lamp timer and press
MODE/ENTER
MODE/ENTER
. A warning message
displays asking if you want to reset the lamp timer. Highlight Reset and press
MODE/ENTER
MODE/ENTER
. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
7.
Tighten the screws that secure the lamp.
•
Loose screw may cause a bad connection,
which could result in malfunction.
which could result in malfunction.
•
Do not over tighten the screw.
8.
Ensure the handle is fully laid flat and
locked in place.
9.
Replace the lamp cover on the
projector.
10. Press the lamp cover down until the
click is heard locking the projector.
SP84
0
Reset Lamp Timer?
Reset
Cancel
Notice