Benq Projector MX661 Manuel D’Utilisation
Operation 33
•
The input signal type effects the options available for the Picture Mode. See
for details.
•
For best display picture results, you should select and use an input signal which outputs at
this resolution. Any other resolutions will be scaled by the projector depending upon the
'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See
for details.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color space
to YUV.
1.
Press MENU/EXIT and then press
/
until the SOURCE menu is highlighted.
2.
Press
to
highlight
Color Space Conversion and press
/
to select a
suitable color space.
This function is only available when the HDMI input port is in use.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the remote control
1.
1.
Press Digital Zoom +/- to display the Zoom
bar.
bar.
2.
Press Digital Zoom + to magnify the center
of the picture. Press the key repeatedly until
the picture size is suitable for your need.
of the picture. Press the key repeatedly until
the picture size is suitable for your need.
3.
Use the directional arrows ( ,
,
,
)
on the projector or remote control to
navigate the picture.
navigate the picture.
4.
To restore the picture to its original size,
press AUTO. You can also press Digital
Zoom -. When the key is pressed again, the
picture is further reduced until it is restored to the original size.
press AUTO. You can also press Digital
Zoom -. When the key is pressed again, the
picture is further reduced until it is restored to the original size.
• Using the OSD menu
1.
1.
Press MENU/EXIT and then press
/ until the DISPLAY menu is highlighted.
2.
Press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar
displays.
3.
above. Or if you are
using the projector control panel, continue to the following steps.
4.
Press on the projector repeatedly to magnify the picture to a desired size.
5.
To navigate the picture, press MODE/ENTER to switch to the paning mode and
press the directional arrows ( ,
press the directional arrows ( ,
,
,
) to navigate the picture.
6.
Use the directional arrows ( ,
,
,
) on the projector or remote control to
navigate the picture.
7.
To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/
out functionality, and press AUTO to restore the picture to its original size. You can
also press repeatedly until it is restored to the original size.
out functionality, and press AUTO to restore the picture to its original size. You can
also press repeatedly until it is restored to the original size.