Benq Projector MX661 Manuel D’Utilisation
Operation 47
Wireless connection
1.
Connect the BenQ wireless dongle (optional) to the TYPE-A input jack of the
projector.
projector.
2.
Highlight Wireless LAN in SYSTEM SETUP: Advanced > Network Settings
menu and press MODE/ENTER.
3.
Make sure the Status is Connect.
4.
Make sure the SSID information is displayed.
5.
For AP mode, you need to use your computer’s wireless connection utility to search
the projector’s SSID and connect to it. The password of connection the Wi-Fi for the
first time is “87654321”. Then you can search the projector with Q Presenter. To use
Client mode, you should connect both your computer and projector to the same
AP router and make connections with the IP address. See
the projector’s SSID and connect to it. The password of connection the Wi-Fi for the
first time is “87654321”. Then you can search the projector with Q Presenter. To use
Client mode, you should connect both your computer and projector to the same
AP router and make connections with the IP address. See
for details.
If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the
network.
The following diagram describes how to access the Internet in AP and Client modes.
If you need more information about AP and Client modes, please refer to user documentations
for Wireless Routers which are usually available on 3C stores.
BenQ wireless dongle
(AP Mode)
Internet
(Client Mode)
Internet