Benq Projector MX511 Manuel D’Utilisation
Operation
46
Description of each menu
•
The default values listed in this manual, especially on pages
, are for reference only.
They may vary between the projectors due to the continuous improvement to the
products.
products.
FUNCTION
(default setting/
value)
DESCRIPTION
(default setting/value)
Wall Color
Corrects the projected picture’s color when the projection surface is
not white. See
not white. See
for details.
Aspect Ratio
for
details.
Keystone
Corrects any keystoning of the image. See
for details.
Position
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach
their maximum or minimum.
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach
their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
selected.
Phase
(depends on the
selected input
signal)
Adjusts the clock phase to reduce image
distortion.
distortion.
This function is only available when a PC
signal (analog RGB) is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
selected.
Digital Zoom
Magnifies or reduces the projected image. See
for details.
1. DISP
LAY
menu