Manualsbrain.com
  1. Manuels
  2. Marques
  3. Benq
  4. Projector MP780 ST+
  5. Manuel D’Utilisation

Benq Projector MP780 ST+ Manuel D’Utilisation

Télécharger
Page de 104
Operation
50
Controlling the projector through a LAN
environment
Network Settings allow you to manage the projector from a computer using a web 
browser when the computer and the projector are properly connected to the same local 
area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the LAN input jack of the projector and 
the other end to the RJ45 port.
2.
Press MENU/EXIT and then press 
/
 until the SYSTEM SETUP: 
Advanced menu is highlighted.
3.
Press 
 to highlight Network Settings and press MODE/ENTER. The 
Network Settings page displays.
4.
Press 
 to highlight Wired LAN and press MODE/ENTER.
5.
Press 
 to highlight DHCP and press 
/
 to select On.
6.
Press 
 to highlight Apply and press MODE/ENTER.
7.
Re-enter the Wired LAN page. The IP Address,
 
Subnet Mask, Default Gateway, and 
DNS settings will be displayed. Note down the IP address.
If the IP Address still does not display, contact your ITS administrator.
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press 
 to highlight DHCP and press 
/
 to select Off.
3.
Contact your ITS administrator for information on the IP Address, Subnet Mask, 
Default Gateway, and DNS settings.
4.
Press 
 to select the item you want to modify and enter the value.
5.
Press 
 to highlight Apply and press MODE/ENTER.
Configuring the Wireless LAN Settings
1.
Connect the BenQ wireless dongle (optional) to the USB TYPE-A input jack of the 
projector.
2.
Highlight Wireless LAN in SYSTEM SETUP: Advanced > Network Settings
 
menu and press MODE/ENTER.
3.
For AP mode connection, you need to note SSID information, then search the 
projector with the same SSID in Q Presenter to start projection. For