Benq PE5120 Manuel D’Utilisation
20
Using the on-screen display menus
Picture menu
Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments
are not shown on the screen. Refer to page
are not shown on the screen. Refer to page
for functions available for each signal type.
1.
Preset Mode: Preset modes are provided so you can optimize your projector image set-up to suit your
program type. See page
program type. See page
for more information.
2.
Color Temp: 3 color temperature settings are available.
• Standard: Maintains normal colorings for white.
• High: Makes images appear bluish white.
• Low: Makes images appear reddish white.
• High: Makes images appear bluish white.
• Low: Makes images appear reddish white.
3.
Brightness: Adjusts the brightness of
the image. The higher the value, the
brighter the image. And lower the
value, the darker the image. Adjust this
control so the black areas of the image
appear as black and that detail in the
dark areas is visible.
the image. The higher the value, the
brighter the image. And lower the
value, the darker the image. Adjust this
control so the black areas of the image
appear as black and that detail in the
dark areas is visible.
4.
Contrast: Adjusts the degree of
difference between dark and light in
the image. The higher the value, the
greater the contrast.
difference between dark and light in
the image. The higher the value, the
greater the contrast.
5.
Color: Increases or decreases the color
intensity of the image.
intensity of the image.
6.
Sharpness: Adjusts the image to make
it look sharper or softer.
it look sharper or softer.
7.
Tint: Adjusts the color tones of the image. The higher the value, the more reddish the image becomes. The
lower the value, the more greenish the image becomes.When a Video or S-Video signal is connected, the
function is only available with NTSC system selected.
lower the value, the more greenish the image becomes.When a Video or S-Video signal is connected, the
function is only available with NTSC system selected.
1.
Press Menu on the projector or remote control to
open the on-screen menu.
open the on-screen menu.
2.
Press
3 Left or Right 4 on the projector or 3 or
4 on the remote control to select the
Setting menu.
3.
Press
5Exit or 6Menu on the projector or 6 or 5
on the remote control to select Keystone.
4.
Adjust keystone values by pressing
3 Left
or Right
4 on the projector or 3 or 4
on the remote control.
5.
Press
5Exit twice* on the projector or
press Menu on the remote control to leave
and save the setting.
and save the setting.
*The first press leads you back to the submenu and
the second press closes the on-screen menu.
50
-30
+70
-30
50
+70