Benq PB6110 Manuel D’Utilisation
Operation
19
Shutdown
1.
Press Power and a warn-
ing message appears. Press
Power a second time to
turn the projector off.
ing message appears. Press
Power a second time to
turn the projector off.
2.
The Power indicator light
flashes orange and the
lamp shuts down, the fans
continue to run for
approximately 110 seconds
to cool down the projector.
flashes orange and the
lamp shuts down, the fans
continue to run for
approximately 110 seconds
to cool down the projector.
To protect the lamp, the projector
will not respond to any com-
mands during the cooling pro-
cess.
will not respond to any com-
mands during the cooling pro-
cess.
3.
Disconnect the power cord from the wall socket.
Do not unplug the power cord before the projector shutdown sequence is complete or during
the 110-second cooling down process.
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the
projector within hours, the fans will run for a few minutes to cool down. Press Power again to
start the projector after the fans stop.
the 110-second cooling down process.
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the
projector within hours, the fans will run for a few minutes to cool down. Press Power again to
start the projector after the fans stop.