Benq PB2120 Manuel D’Utilisation
Introduction
5
BenQ PB2220/ PB2120 User’s Guide
External Control Panel
•
Press and hold Power for 1 second to turn the projector on or off.
•
When the projector is on, Back-lit Power will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
solid green to indicate the projector is ready for use.
•
The Infrared Remote Receiver (Front and Rear) allows the projector to
accept signals from the remote control. For best results, be sure to aim the
control toward the sensor without any obstructions between the two, and at a
distance no greater than 6 meters.
accept signals from the remote control. For best results, be sure to aim the
control toward the sensor without any obstructions between the two, and at a
distance no greater than 6 meters.
•
Menu will display the menu system on screen. Press Menu again to access the
sub-menus. Left and Right help you navigate among choices and settings in the
menus and sub-menus. However, when the on screen menu is not activated, the
Left and Right buttons will function as Keystone +/- hot keys.
sub-menus. Left and Right help you navigate among choices and settings in the
menus and sub-menus. However, when the on screen menu is not activated, the
Left and Right buttons will function as Keystone +/- hot keys.
•
Press the Exit button to go back to the main menu. Press Exit again to leave the
menu system.
menu system.
•
The Lamp Status Indicator will flash or light up when the lamp needs service,
cooling or replacement. See “Lamp Information” on page 20 for more detailed
information.
cooling or replacement. See “Lamp Information” on page 20 for more detailed
information.
•
Auto key: Automatically sense the best picture quality for current received
signals.
signals.
•
Source key: Select signal sources from among PC, Video, S-Video and YPbPr,
when several input sources are available.
when several input sources are available.
Keystone/ Left
Auto
Exit
Keystone/ Right
Lamp Status Indicator
Source
Power
Menu