Benq PB8263 Manuel D’Utilisation
Connection
24
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the screen, you
can connect the RGB signal output socket on the projector to an external monitor with a
VGA or VGA to DVI-A cable following the instructions below:
can connect the RGB signal output socket on the projector to an external monitor with a
VGA or VGA to DVI-A cable following the instructions below:
To connect the projector to a monitor (either through a VGA cable or VGA to
DVI-A cable):
The final connection path should be like that shown in the following diagram:
The D-Sub output only works when an appropriate D-Sub input is made to the projector. Be
sure the projector is connecting with the computer using the D-Sub/Comp. In socket, not
the DVI socket.
sure the projector is connecting with the computer using the D-Sub/Comp. In socket, not
the DVI socket.
•
With a VGA cable:
•
With a VGA to DVI-A cable:
Note: You monitor must be equipped with a
DVI input socket.
1.
Connect the projector to a computer as described in
.
2.
Take a suitable VGA cable (only one
supplied) and connect one end of
the cable to the D-Sub input socket
of the video monitor.
supplied) and connect one end of
the cable to the D-Sub input socket
of the video monitor.
3.
Connect the other end of the cable
to the D-Sub Out socket on the
projector.
to the D-Sub Out socket on the
projector.
2.
Take a VGA to DVI-A cable and
connect the DVI end of the cable to
the DVI input socket of the video
monitor.
connect the DVI end of the cable to
the DVI input socket of the video
monitor.
3.
Connect the VGA end of the cable to
the D-Sub Out socket on the
projector.
the D-Sub Out socket on the
projector.
notebook or desktop
computer
VGA to DVI-A
cable
VGA cable
(VGA)
(DVI)
or
VGA cable