Benq PB8263 Manuel D’Utilisation

Operation

32

Auto-adjusting the image

In some cases, you may need to optimize the picture 
quality. To do this, press AUTO on the projector or 
remote control. Within 3 seconds, the built-in 
Intelligent Auto Adjustment function will re-adjust 
the values of Frequency, and Clock to provide the 
best picture quality. 

The current source information will be displayed at 
the bottom right of the screen for 3 seconds. 

Fine-tuning the image size and clarity

Searching for details on the image

If you need to find the details on the projected image, press D. 
ZOOM + on the remote control, the center of the image will be 
magnified. When the + button is pressed again, the image is further 
magnified. Use the directional arrows ( , , , ) on the 
projector or remote control to navigate the image. Pressing D. 
ZOOM - reduces the size of the image. When the - button is pressed 
again, the image is further reduced until it is restored to the original 
size. You can also restore the original size by pressing RETURN on 
the remote control.

Any problems?

If you have other display problems, see 

 for details.

1.

Adjust the projected image to the size 
that you need using the zoom ring. 

2.

Then sharpen the image by rotating 
the focus ring.