Benq PB2240 Manuel D’Utilisation

Operation

28

4. Advance Menu

The projector can be installed on a ceiling or behind a screen, or with one 
or more mirrors. Contact your dealer for the ceiling mount bracket 
(optional accessory) if you need to install the projector on your ceiling.

 

Floor front: Select this setting with 

the projector set on the floor and 
audience viewing the projected 
images from the front side of the 
screen. This is the most common 
setting.

 

Ceiling front: Select this setting with 

the projector suspended from the 
ceiling and audience viewing the 
projected images from the front 
side.

 

Floor rear: Select this setting when 

the projector is placed near the 
floor and behind the screen. A 
special rear projection screen is 
required.

 

Ceiling rear: Select this setting when 

the projector is suspended from the 
ceiling and placed behind the 
screen. A special rear projection 
screen is required.

Sets the image blank time when the Blank feature is activated, once 
elapsed the image will return to the screen.

Sets whether the projector searches automatically for input signals. If the 
source scan is on, the projector will scan for input signals in the following 
order: Analog RGB --> Video --> S-Video until it acquires a signal. If the 
function is not activated, the projector selects the last input signal.

Language sets the language for the OSD control menus.

Use 

3 Left/ Right 4on the projector or 3/ 4 on the remote control to 

select your desired language from among English, French, German, Ital-
ian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese 
and Korean. 

Enables the user to select which logo screen will appear during projector 
start-up. Three modes are available: Default (BenQ logo), black screen or 
blue screen.