GE General Electric Oxygen Equipment PT878 Manuel D’Utilisation
Chapter 3. Programming Site Data
34
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.3 Entering Pipe Parameters (cont.)
If you select a material that uses the Diameter alternative:
a.
You must select from two choices, outside diameter or
circumference.
circumference.
•
The prompt moves to the OD (outside diameter) text box. Type the
thickness (in mm or in.) into the text box, and press
thickness (in mm or in.) into the text box, and press
[ENTER]
to
confirm the choice, or
•
Move the prompt to the OD X PI (circumference) text box. Type
the OD (in mm or in.) into the box, and press
the OD (in mm or in.) into the box, and press
[ENTER]
to confirm
your choice.
b.
In either case, the next prompt asks for the wall thickness. Type the
value (in mm or in.) into the box, and press
value (in mm or in.) into the box, and press
[ENTER]
to confirm your
choice.
Note:
The measurement units shown depend on the choices you have made
in the English/Metric window or the Meter Settings menu.
in the English/Metric window or the Meter Settings menu.
If you select a material that has the Schedule option:
a.
The prompt asks if you wish to apply ANSI (the ANSI schedule).
Press
Press
[ENTER]
to select (or deselect) the ANSI box. (If you do not
select the ANSI option, the prompt moves to the OD text box, and
you enter the parameters for the Diameter alternative as discussed
above.)
you enter the parameters for the Diameter alternative as discussed
above.)
b.
Press the [
W
] key twice to move the prompt to the Nominal pipe
size drop-down menu. Press
[ENTER]
to open the menu. Scroll to
the desired pipe size, and press
[ENTER]
to confirm your choice.
c.
Press the [
X
] key to move the prompt to the Schedule drop-down
menu. Press
[ENTER]
to open the menu. Scroll to the desired
schedule, and press
[ENTER]
to confirm the choice.
After entering either diameter or schedule settings, pressing the [
S
] key
returns the meter to the Pipe Material prompt.