Brother MFC-8680DN Manuel Du Propriétaire
Troubleshooting and routine maintenance
123
C
Telephone line or connections
Difficulties
Suggestions
Dialing does not work.
Check for a dial tone.
Change Tone/Pulse setting. (See the Quick Setup Guide.) (Canada only)
Check all line cord connections.
Check that the machine is plugged in and switched on.
Send a manual fax by pressing Hook or by lifting the handset of an external
telephone and dialing the number. Wait to hear fax receiving tones before
pressing Start.
telephone and dialing the number. Wait to hear fax receiving tones before
pressing Start.
The machine does not answer
when called.
when called.
Make sure the machine is in the correct receive mode for your setup. (See
on page 48.) Check for a dial tone. If possible, call your machine to hear it answer.
If there is still no answer, check the telephone line cord connection. If you do not
hear ringing when you call your machine, ask your telephone company to check
the line.
on page 48.) Check for a dial tone. If possible, call your machine to hear it answer.
If there is still no answer, check the telephone line cord connection. If you do not
hear ringing when you call your machine, ask your telephone company to check
the line.
Receiving Faxes
Difficulties
Suggestions
Cannot receive a fax.
Make sure your machine has a dial tone by pressing the Hook key. If you hear
static or interference on your fax line, please contact your local telephone
company.
static or interference on your fax line, please contact your local telephone
company.
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack of the machine. If you subscribe to DSL
or VoIP services, please contact your service provider for connection instructions.
the telephone wall jack and the LINE jack of the machine. If you subscribe to DSL
or VoIP services, please contact your service provider for connection instructions.
Make sure the machine is in the correct Receive Mode. This is determined by the
external devices and telephone subscriber services you have on the same line as
the Brother machine. (See Receive Mode settings on page 50.)
external devices and telephone subscriber services you have on the same line as
the Brother machine. (See Receive Mode settings on page 50.)
If you have a dedicated fax line and want your Brother machine to automatically
answer all incoming faxes, you should select Fax Only mode.
answer all incoming faxes, you should select Fax Only mode.
If your Brother machine shares a line with an external answering machine, you
should select the External TAD mode. In External TAD mode, your Brother
machine will automatically receive incoming faxes and voice callers will be able to
leave a message on your answering machine.
should select the External TAD mode. In External TAD mode, your Brother
machine will automatically receive incoming faxes and voice callers will be able to
leave a message on your answering machine.
If your Brother machine shares the line with a Voice Mail subsciber service, please
see Voice Mail on page 54.
see Voice Mail on page 54.
If your Brother machine is on a line with the Distinctive Ring subscriber service,
please see Distinctive Ring on page 54.
please see Distinctive Ring on page 54.
If your Brother machine shares a line with other telephones and you want it to
automatically answer all incoming faxes, you should select the Fax/Tel mode. In
Fax/Tel
automatically answer all incoming faxes, you should select the Fax/Tel mode. In
Fax/Tel
mode, your Brother machine will automatically receive faxes and
produce a pseudo/double-ring to alert you to answer voice calls.
If you do not want your Brother machine to automatically answer any incoming
faxes, you should select the Manual mode. In Manual mode, you must answer
every incoming call and activate the machine to receive faxes.
faxes, you should select the Manual mode. In Manual mode, you must answer
every incoming call and activate the machine to receive faxes.