Brother MFC-8680DN Manuel Du Propriétaire
General information
9
1
Status LED indications
1
The Status LED (light emitting diode) will flash and change color depending on the machine’s
status.
status.
Note
When the power switch is off or the machine is in Sleep mode, the LED is off.
LED
Machine Status
Description
Sleep Mode
The power switch is off or the machine is in Sleep mode.
Green
(blinking)
Warming Up
The machine is warming up for printing.
Green
Ready
The machine is ready to print.
Yellow
(blinking)
Receiving Data
The machine is either receiving data from the computer,
processing data in memory, or printing data.
processing data in memory, or printing data.
Yellow
Data Remaining
in Memory
in Memory
Print data remains in the machine memory.
Red
(blinking)
Service error
Follow the steps below.
1. Turn off the power switch.
2. Wait a few seconds, and then turn it back on and try to print
again.
If you cannot clear the error and you see the same service call
indication after turning the machine back on, please call Brother
Customer Service. (See Brother numbers on page i.)
1. Turn off the power switch.
2. Wait a few seconds, and then turn it back on and try to print
again.
If you cannot clear the error and you see the same service call
indication after turning the machine back on, please call Brother
Customer Service. (See Brother numbers on page i.)
Red
Cover open
The front cover or fuser cover is open. Close the cover.
Toner Life End
Replace the toner cartridge with a new one.
Paper error
Put paper in the tray or clear the paper jam. Check the LCD
message.
message.
Scan lock
Check that the scanner lock lever is released.
Others
Check the LCD message.