Exergen Transmitter IRt/c.XMTR Manuel D’Utilisation

C

O

R

P

O

R

A

T

I

O

N

4 8

4 8

4 8

4 8

4 8

51 Water Street, Watertown, MA 02172 USA
800-422-3006 • 617-923-9900 • Fax 617-923-9911

IRt/c Accessories

∅

The t/c.XMTR is specifically designed to interface any model IRt/c by a
simple thermocouple connector or splice. The two wire current loop can
be used in any conventional 4-20mA, 0-5V or 0-10V circuit that is scaled
for the temperature range of interest.

For OEMs, IRt/c sensors and t/c.XMTR can be supplied pre-wired
together.

· Use any existing wiring, for easy low cost installation

· Use existing PLC, computer or controller inputs

· In line design requires no mechanical support

· Pre-calibrated for IRt/c type, no span or zero adjustment neces-

sary

· Hermetically sealed construction exceeds NEMA 4, 4X, IP65, 66,

67

· Stainless Steel construction can withstand harsh environments

32°F (0°C)

150°F (65°C)

500°F (260°C)

1000°F (540°C)

2000°F (1100°C)

3000°F (1650°C)

±0.1% F.S. conversion of thermocouple mV input to mA output

160 msec (10Hz bandwidth)

32 to 158°F (0 to 70°C)

<0.02% F.S. per °C

<1nv rms (100Hz bandwidth)

Upscale: goes to >20 mA

12 VDC minimum @10; to 22 VDC minimum @1K

-85 to 257°F (-65 to 125°C)

2.4 oz (68 g) with cables

Stainless steel, hermetically sealed, meets or exceeds all applicable NEMA ratings, housing

electrically isolated from signal.