Behringer Digital Mixer X32 Manuel
music-group.com
behringer.com
2
PERMANENT MIDI ASSIGNMENTS OVERVIEW (REMOTE OFF)
MIDI RX
Midi Ch
Controller
Value
Comment
Scenes
1 Program
Change
1-100
Snippet
2 Program
Change
1-100
Cue
3-6
Program Change
0-127
Ch3 -> Cue 1-127, Ch4 -> Cue 128-255, etc.
Mute Groups
2
CC80-85
on (127) / off (0), toggle latching
Faders
1
CC0-79
0-127
Value 95 = 0dB
Mute
2
CC0-79
on (127) / off (0), toggle latching
Pan
3
CC0-79
1-127
Value 64 = Pan Mid
MIDI TX
Midi Ch
Controller
Value
Comment
Mute Groups
2
CC80-85
on (127) / off (0), toggle latching
Faders
1
CC0-79
0-127
Value 95 = 0dB
Mute
2
CC0-79
on (127) / off (0), toggle latching
Pan
3
CC0-79
1-127
Value 64 = Pan Mid
MIDI RX > ASSIGN
Whenever assignable controls are set up for transmitting MIDI commands, reception of that same
command (status or continuous) will be refl ected on the respective assignable control element
(button light, encoder LED collar).
command (status or continuous) will be refl ected on the respective assignable control element
(button light, encoder LED collar).
MIDI TX > ASSIGN
We restricted the user assignable MIDI commands to some generic elements, in order to keep things
simple enough:
simple enough:
•
Encoders 1-4 > can be assigned to sending control changes, program changes or notes
–
parameters are currently ‘Channel’ and ‘Value’
–
for CC and Note commands ‘Value’ = controller number/note number, and the encoder
rotation determines the controller value/note-on velocity
rotation determines the controller value/note-on velocity
–
for Program Changes only the channel is specifi ed, and the encoder rotation determines the
program number
program number
•
Buttons 5-12 > can be operated in two modes, ‘MIDI Push’ (non-latching) for momentary
commands, or ‘MIDI Toggle’ (latching) for static commands
commands, or ‘MIDI Toggle’ (latching) for static commands