Galileo TCP/IP Print Server Manuel D’Utilisation
TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr)
9
If necessary, change the GTID on an assigned port. Do NOT change the BAUD, PARITY,
DATA or STOP. If the settings do NOT match those above, please contact your Galileo or
Apollo Account Representative before making any further changes. If so directed to change these
settings, arrow to the field and press the F2 key for a list of available choices.
DATA or STOP. If the settings do NOT match those above, please contact your Galileo or
Apollo Account Representative before making any further changes. If so directed to change these
settings, arrow to the field and press the F2 key for a list of available choices.
Be sure that the print device to which the GTID is being assigned is attached to the ARTIC cable
on the port indicated in the TCP/IP Print Server Configuration Utility.
on the port indicated in the TCP/IP Print Server Configuration Utility.
When finished, press CTRL+ENTER to store.
IF CONFIGURATION IS COMPLETE, REMEMBER TO SAVE AND
BACKUP THE CONFIGURATION!
BACKUP THE CONFIGURATION!