Euphonix Studio Hub SH612 Manuel D’Utilisation

Euphonix SH612 Studio Hub User Guide

 

Menu Reference and Technical Specifications

35

The SH612 has three time code outputs: VITC, LTC, MTC. The time code outputs al-
ways represent the current time of the SH612.

Generate - This is the default mode for the SH612. Time code is internally generated, 
routed to the time code outputs, and sample-rate-resolved.

External - With this setting the SH612 is locked to an external time code source and 
generates the received time code position information at its outputs. This setting corre-
sponds to the Slave key on the R-1 Remote.

External Varispeed - This feature is available only on SH612s configured for R-1 
systems.

Time Code Offset is only relevant when the SH612 is slaved to an external device or an 
external device is slaved via LTC from the R-1. The R-1 does not output offset Time-
code. The Time Code Offset can be positive or negative, and range from 1 frame to 
23:59:59:29. A negative offset is subtracted from the Time Code Source value; a posi-
tive Offset is added to the Time Code Source value. The equation for Current Time is: 

 TC Current Time = TC Source +/- TC Offset

The Time Code Offset defaults to 00:00:00:00 unless specifically set by the user. 

To set the offset:

Use the left/right arrow keys to position the cursor under each of four double-
digit fields.

Use the SpinKnob to set the desired number.

To create a negative offset, position the cursor under the + sign and use the 
SpinKnob to change to the minus sign.

Jam Once - Locks when time code is first received and runs independent of incoming 
time code thereafter.

Jam Continuous - Locks continuously to incoming time code and resynchronizes 
whenever necessary.