Best Data Products DSL502E_EU Manuel D’Utilisation
Best Data DSL542 ADSL Ethernet Router User’s Guide
51
Adding a PPP Interface Definition
If you intend to use more than one type of service from your ISP, the device may be configured
with multiple PPP interfaces, each with unique logon and other properties. Follow this procedure
to define properties for a PPP interface:
with multiple PPP interfaces, each with unique logon and other properties. Follow this procedure
to define properties for a PPP interface:
1.
From the PPP Configuration Page, click
.
The PPP Interface – Add page displays, as shown in Figure 39.
Figure 38. PPP Interface – Add Page
2.
Select a PPP interface name from the drop-down list, and then enter or select data for
each field.
each field.
Note
You can create multiple PPP interfaces only if you are using the
PPoA protocol; only one PPP interface can be define if you are
using PPoE. Check with your ISP which version of the protocol
they require.
PPoA protocol; only one PPP interface can be define if you are
using PPoE. Check with your ISP which version of the protocol
they require.
The fields are defined in the tables on page 49 and 50.
3. Click
.
A page displays to confirm your changes.
4. Click
to return to the PPP page and view the new interface in the table.
5. Click the Admin tab, and then click
Commit & Reboot
in the task bar.
6. Click
to save your changes to permanent memory.