Behringer ULTRALINK ULM100USB Guide D’Installation Rapide

ULM100USB Controls
1.  POWER/STATUS LED
2.  ▼  VOLUME Button (Mute/volume down)
3.  ▲ VOLUME Button (Power on/unmute/volume up)
4.  USB connector
5.  Wireless Link Status LED

ULM100USB Getting Started
1.  Press and hold the  ▲  button to power on the ULM100M 

wireless microphone.

2.  Connect the ULM100R wireless receiver to the wireless only 

USB connector on the wireless enabled device or to a USB port 

on a computer. The ULM wireless microphone will sync to the 

receiver automatically.

3.  Use the  ▼  and  ▲  buttons on the ULM100M wireless 

microphone to adjust the volume.

4.  Press and hold the  ▼  button to mute the volume of the 

ULM100M wireless microphone.

5.  Press and hold the  ▲  button to unmute the volume of the 

ULM100M wireless microphone.

6.  Disconnect the ULM100R wireless receiver. The ULM100M wireless 

microphone will power off when no wireless signal is detected 

for more than 1 minute. To ensure longer battery life, unplug the 

ULM100R wireless receiver after use.

RF output 

+17 dBm (50 mW)

Working range 

120 m maximum (Line of 

Sight)

Dynamic range 

> 67 dB

Frequency response  

20 Hz – 15 kHz 

(Wireless Link) 
Sampling rate 

31.25 kHz

Audio coding 

Pulse-coded modulation 

(PCM)

RF channel 

2.4 GHz ISM band (2417 - 

2471 MHz), 19 channels

Latency 

9 ms

Power supply current  

160 mA @ +2.7 VDC,  

(microphone) 

140 mA @ +3 VDC

Power supply current  

100 mA @ +5 VDC 

(USB receiver) 
Dimensions (W x D x H) 

45 x 45 x 245 mm 

(1.8 x 1.8 x 9.6")

Weight 

0.2 kg (0.4 lbs)

(1)

(2) (3)

(5)

(4)

Model: ULM100R

Model: ULM100M