Epson 24-Pin Dot Matrix Printer LQ-570e Manuel D’Utilisation
EPSON LQ-570e
2 -
EPSON LQ-570e
4/00
Optional Interface Cards
You can install an optional interface card to supplement your
printer’s built-in parallel interface and provide added network
compatibility. The EPSON interface cards in the table below
are compatible with your printer.
printer’s built-in parallel interface and provide added network
compatibility. The EPSON interface cards in the table below
are compatible with your printer.
* If you install the C823051 optional serial interface card, be sure to
set the transfer speed to one of the following: 300, 600, 1200, 2400,
4800, 9600, or 19200 bps.
Printer Specifications
Mechanical
Model number
Card type
C823051
Serial Type B interface card
C823071
32KB serial Type B interface card
C823121
LocalTalk interface card
C823141
Coax Type B interface card
C823151
Twinax Type B interface card
C823451
IEEE-1284 (Type B bidirectional)
parallel interface card
C823622
Type B Ethernet interface card for
10 Base 2 / 10 Base T
C823642
Type B Ethernet interface card for
10/100 Base TX with AC adapter
Printing method
24-pin impact dot matrix
Emulation
EPSON ESC/P
®
2 and IBM 2390 Plus
Printing speed
High-speed draft
400 cps at 10 cpi
Draft
300 cps at 10 cpi
360 cps at 12 cpi
450 cps at 15 cpi
360 cps at 12 cpi
450 cps at 15 cpi
Draft condensed
257 cps at 17 cpi
300 cps at 20 cpi
300 cps at 20 cpi
LQ
100 cps at 10 cpi
120 cps at 12 cpi
150 cps at 15 cpi
120 cps at 12 cpi
150 cps at 15 cpi
LQ condensed
171 cps at 17 cpi
200 cps at 20 cpi
200 cps at 20 cpi
Printing direction
Bidirectional logic seeking for text and
graphics printing. Unidirectional text
or graphics printing can be selected
using software commands.
graphics printing. Unidirectional text
or graphics printing can be selected
using software commands.
Line spacing
1/6 inch or programmable in
1/360-inch increments
1/360-inch increments
Printable columns
80 columns (at 10 cpi)
Resolution (maximum) Letter quality: 360
×
180 dpi
Raster graphics: 360
× 360
dpi
Interfaces
1 standard bidirectional, 8-bit parallel
interface with IEEE-1284 nibble mode
support, and 1 optional interface slot
interface with IEEE-1284 nibble mode
support, and 1 optional interface slot
Paper feed methods
Friction (front or top paper entry)
Push tractor (rear paper entry)
Pull tractor (front, bottom, or rear
paper entry)
paper entry)
Push and pull tractor (optional)
High-capacity cut-sheet feeder
(optional)
(optional)
Roll paper holder (optional)
Paper feed speed
Continuous
5 inches/second
Intermittent
45 ms/line at 1/6-inch line spacing
Paper capacity
Optional high-capacity cut-sheet feeder
up to 150 sheets of 22 lb (82 g/m
2
)
paper
up to 25 plain or bond envelopes
up to 30 airmail envelopes
up to 30 postcards
up to 25 plain or bond envelopes
up to 30 airmail envelopes
up to 30 postcards
Single-bin cut-sheet feeder
up to 50 sheets of 22 lb (82 g/m
2
)
paper
The total thickness of the
paper stack can be up to
0.20 inch (5 mm).
Buffer
64KB