West Bend FB500 - Fitness Blender Manuel Du Propriétaire

Before assembling your Fitness Blender wash all parts, except for motor base, in 
warm, soapy water, rinse thoroughly and dry.  Unscrew and disassemble the valve 
for cleaning (see Cleaning Your Blender section).  To prolong the life of your 
smoothie maker, do not wash parts in the dishwasher. 

 

1.  Screw blade base on the bottom of the blending jar by twisting the blade base 

counter-clockwise until tightened.  Make sure that the blade base is tightly 
fastened to the blending jar and that the rubber gasket is properly compressed 
between the blending jar and the blade base. 

2.  Press the lid onto the top of the blending jar.  Press the clear lid cap in the 

center of the lid or place the stir stick through the center of the lid if blending 
liquids or frozen drinks. 

3.  Place the blending jar onto the motor base so that the bottom of the blade base 

is sitting flat on the motor base. 

4.  Plug in the cord.  Your blender is now ready to use. 

 

• 

Note:  The rubber gasket on the blade base is not removable. 

 
Stir Stick 

 

5