Whirlpool FGS337G Manuel D’Utilisation

25

R

EMOVING THE OVEN DOOR

(

CONT

.

)

CARING FOR YOUR RANGE

Carefully close the door until it rests against the
door removal pins.

To replace:

The door removal pins you inserted must

still be in both door hinges.

Grasp the door on the sides with your fingers 
on the front of the door and your thumbs on the
inside surface.

Hold oven door so that the top edge of each 
hinge hanger is horizontal. Insert hinge hangers 
into the front frame hinge slots.

Rotate top of door toward range. Slide hinge 
hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully
seated and engaged on the support pins.

Insert the door stop clip with the angular surface 
at the top of the frame hinge slot, then push in 
the bottom of the clip until flanges are flush with 
the front frame.

Open the door completely and remove the door 
removal pins. Save door removal pins for future 
use.

Close the door.

Pull door straight up, then toward you. Hinge
hangers will slide out of front frame hinge slot.

To remove:

Open the oven door. Insert door removal pins,

included with your
range, into both hinge
hangers. Do not 
remove the pins while
the door is removed
from the range.

Grasp the door on the sides with your fingers on

the front of the door and
your thumbs on the
inside surface.