Brother MFC-7360 Manuel D’Utilisation

Loading paper

If you use any of the types of envelopes 
listed above, they may damage your 
machine. This damage may not be 
covered under any Brother warranty or 
service agreement.

 

The machine will print on most types of labels 
designed for use with a laser machine. Labels 
should have an adhesive that is acrylic-based 
since this material is more stable at the high 
temperatures in the fuser unit. Adhesives 
should not come in contact with any part of 
the machine, because the label stock may 
stick to the drum unit or rollers and cause 
jams and print quality problems. No adhesive 
should be exposed between the labels. 
Labels should be arranged so that they cover 
the entire length and width of the sheet. Using 
labels with spaces may result in labels 
peeling off and causing serious jams or print 
problems.

All labels used in this machine must be able 
to withstand a temperature of 392 degrees 
Fahrenheit (200 degrees centigrade) for a 
period of 0.1 seconds.

Do not feed a label sheet through the 
machine more than one time.

Do not use labels that are damaged, curled, 
wrinkled or an unusual shape.

 

• Avoid feeding labels with the carrier sheet 

exposed because your machine will be 
damaged.

• Label sheets should not exceed the paper 

weight specifications described in this 
User’s Guide. Labels exceeding this 
specification may not feed or print properly 
and may cause damage to your machine.

• DO NOT reuse or insert labels that have 

previously been used or are missing few 
labels on the sheet.