West Elm Coconut Strips Pendant Instructions De Montage

assembly instructions

coconut strips pendant

Important Safety Instructions:

·Joist mounting is recommended. Use proper hardware for your ceiling type. When in doubt consult your local hardware

store. For your safety, it is strongly recommended that two people hang the lamp.

·Light bulb should be centered inside the pendant shade. Making sure it does not touch the shade.

·These instructions are provided for your safety. It is important that they are read carefully and completely before

assembling fixture.

·This fixture has been rated for up to (1) 60-watt maximum TYPE A standard light bulb (not included). To avoid the risk of

fire, do not exceed the recommended wattage.

Warning:

·To reduce the risk of fire, electrical shock or personal injury, always turn off lamp and allow it to cool prior to replacing light

bulb.

·Do not touch light bulb when fixture is turned on.

·Keep flammable materials away from light bulb.

·THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR

WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

·Do not install on a radiant-heating ceiling.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective

packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally

discarding small parts or hardware.

·For your safety and convenience, assembly by two people is recommended.

·In order to use conversion kit, you must already have purchased a West Elm 3 wire

cordset with plug shown below:

wire nut connector 3x

mounting screw 2x

ground screw 1x

canopy screw 2x

Parts Enclosed:

• Mounting Plate (E)

• Cord Screw (I)

• Canopy (L)

Hardware Included:

• Wire Connector (A)

• Ground Screw (B)

• Canopy Screw (C)

• Mounting Screw (D)

ceiling junction box

I L

Parts Enclosed

w/3-Wire Cordset :

• Socket (F)

• Socket Ring (G)

• Shade (H)

• Cable Stop (J)

• Cable Screw (K)

page 1 of 3

1772060/1742857

Tools needed: