ASUS TERMINATOR II T2-P STANDART TERMINATOR II T2-P STANDA Manuel D’Utilisation

The Security menu items allow you to change the system security settings.
Select an item then press Enter to display the configuration options.

Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After
you have set a password, this item shows Installed.

To set a Supervisor Password:

1.

Select the Change Supervisor Password item and press Enter.

2.

On the password box that appears, type a password composed of
letters and/or numbers, then press Enter. Your password should have at
least six characters.

3.

Confirm the password when prompted.

The message “Password Installed” appears after you have successfully set
your password.

The Supervisor Password item now shows Installed.

To change the supervisor password, follow the same steps as in setting a
user password.

To clear the supervisor password, select the Change Supervisor Password
then press Enter. The message “Password Uninstalled” appears.

If you forget your BIOS password, you can clear clear it by erasing the
CMOS Real Time Clock (RTC) RAM. Refer to section “4.3 Jumper” for
instructions on erasing the RTC RAM.