Emerson 5-In-One Learning Light-Up Remote Manuel Du Propriétaire

17

Operation

Your remote has a backlight so you can see the keys in
the dark. To turn on the light, press 

 at the top right

of the remote. 

When you press a key, the remote lights for a few sec-
onds. To turn off the light, press 

 again.

Important: If you have set up 

 for Favorite

Channel Scan, you cannot use Channel Scan until you
have reset 

 (see “Resetting Scan” on

Page 11).

If you want to view a sample of every channel on your
cable or SAT/DSS service, press 

, then press

. Starting with the current channel, the remote

control tunes to each channel in ascending order every
three seconds. Press any key to stop the scan. 

Note: For on-air broadcast scans, press 

, then press

 to start the scan.

To scan favorite channels, you must first program the fa-
vorite channel table (see “Programming Favorite Chan-
nel Scan” on Page 10).

Press the desired device key (

 or 

), then

press 

. The remote tunes to each favorite

channel in ascending order every three seconds. Press
any key to stop the scan. 

Press the desired macro key once for the first channel
you programmed (see “Programming Macros” on
Page 12), twice for the second channel, and so on.

To turn on all devices, hold down 

 for at least 2

seconds. Each device turns on in the sequence you pro-