Emerson 5-In-One Learning Light-Up Remote Manuel Du Propriétaire

20

Operation

3. Press 

 again within 10 seconds to add

another 15 minutes to the sleep time. Repeat as
desired up to a maximum of 60 minutes.

4. To deactivate the Sleep Timer, press any key. The

red light stops blinking.

The 5-in-One Remote’s built-in sleep function can be en-
abled even if another device has a sleep device. Simply
lock the Sleep Timer to ensure it functions.

1. Select a device for the sleep timer (

 or 

). 

2. Hold down 

 until the red light blinks twice.

3. Press 

. 

4. The red light blinks twice when the Sleep Timer is

locked. (If you are unlocking the Sleep Timer, the
red light blinks four times.)

If your home entertainment device does not respond to
remote control commands after trying all of the codes
listed for your brand, or if your brand is not listed, try
searching for your code.

Follow these steps to search for codes manually.

1. Turn on the desired device. 

2. On the 5-In-One Remote, press the appropriate

device key once.

3. Hold down 

 until the red light blinks twice.

4. Press 

. The red light blinks twice.

5. Aim the 5-In-One Remote at the desired device and

slowly alternate between pressing 

 and the

appropriate device key. Stop when the device turns
off — a code that works has been found.

Note: In the search mode, the remote sends IR
codes from its extensive library to the selected