Emerson 5-In-One Learning Light-Up Remote Manuel Du Propriétaire

5

A Quick Look at the Keys

ˆ

Your Radio Shack 5-In-One Learning Light-Up Remote
controls the most-used functions on your TV, VCR, ca-
ble/SAT/DSS converter, DVD player, and an auxiliary
device.

After you set up the remote control, its command keys
will work like the keys on your original remote controls.
For example, depending on the device you select (TV,
VCR, CBL/SAT, DVD, or AUX) 

 will operate just

like the POWER ON/OFF key on the remote control for
your original TV, VCR, cable/SAT/DSS, DVD player, or
auxiliary device. 

The following table lists all keys and how they function.

Use to program the remote con-
trol. The P key is slightly 
recessed to avoid accidental pro-
gramming changes. You might 
need to use a pointed device, 
such as a ballpoint pen, to apply 
sufficient pressure.

Light Key

Use to turn the backlight on or 
off. When on, any key press acti-
vates the backlight. It stays on 
for up to 5 seconds after the last 
key press.

TV, VCR, CBL/SAT, and 
DVD

Use to set up the remote control 
to replace the devices’ original 
remote controls. In normal oper-
ation, use to remotely select a 
desired device to control.

POWER, VOL +, VOL –, 
CH +, CH–, LAST, 
MUTE, ENTER, 
Digit Keys, Transport 
Keys, +100, and 
TV/VCR (A/B)

Use the same as the corre-
sponding keys on the original 
remote controls. POWER can 
also be programmed for ALL 
POWER on/off of selected 
devices (see “Programming the 
Power Key” on Page 13).