Emerson EM266 Fascicule

Page de 2
NOTE: Charge your headset for at least 8 hours before using 
              it for the first time. 
Model: EM266
Wireless Headset
NOTE: To enter the Pairing Mode, you must press and HOLD the 
                 [POWER] button for approximately 10 seconds.
within 3 feet
Indicator light
Power button
(Press & HOLD)
Pairing the Bluetooth Headset with a Sony PlayStation 3 
<SET ACCESSORY to BLUETOOTH on PS3>
1. Go to the PS3 main menu, scroll to and select “Settings”.
2. Scroll to and select “Accessory Settings”.
3. Scroll to and select “Manage Bluetooth Devices”.
4. The menu will ask: “The Bluetooth device has not been 
    registered. Do you want to register it?”, then select “YES”.
<REGISTER EM266 to PS3>
Put your Bluetooth Headset into pairing mode.
(See “Pairing the headset with a Bluetooth enabled device”)
1. Select “Start Scanning” from the PS3 menu.
2. Once the PS3 has discovered the Headset, the screen will read 
     “Select the Bluetooth device to register”, then select “EM266”
3. The PS3 will ask for a passkey. Enter [0000] then select “OK”. Now 
     press [O] (the PS3 circle button) to get back to the previous menu.
4. Scroll to and select “Audio Device Settings” to change the 
     “Input Device” to “EM266”.
NOTE: “Input Device” is the microphone, and determines the 
               method of how others will hear you speak. By 
               default, the “Output Device” will now switch to “EM266”.
               “Output Device” is the audio, and determines how you will 
                hear the PS3 audio and others speaking. 
To test the connection, speak into the headset and you will see 
the bars above the “Microphone Level” moving, if not, repeat the 
pairing process.
Press “OK” to confirm the new settings. You are now ready to use 
the Bluetooth Headset with your PS3 Entertainment System. If you 
would like to hear the PS3 audio through your TV or Audio System, 
scroll to “Output Device” and switch to “System Default Device”. 
 
For further assistance with Bluetooth settings on your PS3 please 
refer to your PS3 instruction manual.
5. Set your mobile phone to search for Bluetooth devices.
6. When the phone finds the headset, confirm by selecting EM266 
     from the list.
7. Enter passcode “0000” when prompted by the phone.
OR depending on which model mobile phone you are trying 
to connect the headset to, it may not be necessary to enter a 
passcode and the following message (or similar) may appear on 
your phone’s display.
Select “Pair” to complete the pairing process.
Searching for devices
Paired Devices:
1 f
ound
Stop
 *Empty *
Bluetooth: Enabled
Select Device:
Paired Devices:
EM266
Cancel
EM266
Bluetooth: Enabled
Enter numeric passkey
for EM266:
Paired Devices:
0000
OK
EM266
Bluetooth: Enabled
“EM266” would like to pair
with your phone. Would you
like to allow it to pair?
Paired Devices:
Cancel
Pair
EM266
Bluetooth: Enabled
8. Your mobile phone will confirm that the pairing was completed, 
    and prompt you to accept the connection. Please select 
    “YES” to connect the headset to your mobile phone. If the pairing 
    was successful, the headset’s indicator light flashes a steady blue. 
NOTE: The screenshots above are typical of many Bluetooth enabled 
              phones in the market today, and are used to assist in the 
              explanation of the pairing process. Your mobile phone’s 
               interface and interaction with the Bluetooth Headset may 
               slightly differ from the illustrations above.
9. When attempting to reconnect the headset to your mobile 
    phone, you may see the message below, and your mobile 
    phone will prompt you to accept the connection request to 
    the EM266 headset, and an option not to ask this again. 
    Please accept the connection, and if you select “Don’t ask this 
    again”, your phone will automatically accept future connection 
    requests from your Bluetooth Headset.
Confirm connection to
EM266?
Paired Devices:
YES
NO
EM266
Bluetooth: Enabled
/
Accept connection request
from EM266?
Paired Devices:
YES
NO
EM266
Bluetooth: Enabled
/
Don’t ask this again
CAUTION: Although this device enables drivers to 
conduct handsfree conversations, it is still safer to pull
over before using a mobile phone. 
• Do not use the stereo earphone while driving.
• Always keep your full attention on your driving.
Driving while talking on your mobile phone is dangerous, and 
illegal in many states.
Check local laws regarding the use of a mobile handset and wireless
headset while driving. If you use the Bluetooth Headset while 
driving, ensure your attention and focus remains on your driving.
 
Please use your mobile phone, and our product 
responsibly while driving!
1. Connect the USB cable to the charging socket of the headset.
2. Connect the other end of the USB cable to either the:
 
  • AC Charger, and plug into a wall (A/C) outlet
 
  • Computer’s USB port
3. The BLUE LED indicator light turns on.
4. The BLUE LED indicator light shuts off when the headset
    is fully charged (approximately 2-3 hours).
NOTE: When the battery is running low, the BLUE LED indicator 
               light starts to flash.
Charging
Socket
Indicator
light
USB cable
Headset
PC
AC Charger
Silicone
Cushions
S M L
Owner’s Manual
About noise cancellation technology
Charging the Bluetooth Headset
Pairing with the SONY PlayStation®3 (PS3™)
In the box
Location of controls
Drive Safe
1. Make sure the Bluetooth Headset is turned off.
2. Keep your Bluetooth Headset and mobile phone within 3 
     feet of each other during the pairing process.
3. Press and HOLD the 
[POWER] button until the BLUE indicator 
    light turns on, flashes several times, and becomes a steady 
     blue. The headset is now in Pairing Mode, and is ready to 
    connect to your mobile phone.
4. The headset is now in Pairing Mode and is ready to connect 
    to your mobile phone.
Pairing the headset with a Bluetooth enabled device
AC Charger
USB Charging
Cable
Owner’s
Manual
Bluetooth
Headset
Earhook
Stereo
Earphone
Enables the other end of your 
conversation to hear you clearly!
This headset uses a dual microphone design to filter out wind and 
unwanted external noise.
Using Noise Cancellation Technology, the headset compares the 
sound from the twin built-in microphones, and is able to recognize 
the difference between voice and unwanted background noise.
Noise Cancellation Technology
Microphone 1
Microphone 2
Model: EM266
Wireless Headset
Owner’s Manual
stereo
Power button
Power ON/OFF
Answer/end a call
Charging
socket
Silicone
cushion
Microphone 1
Microphone 2
Indicator light
VOLUME UP
VOLUME DOWN