BENDIX SD-03-3411 Manuel D’Utilisation
1
®
SD-03-341
1
Bendix
®
MV-1
™
Modutrol
DESCRIPTION
The Bendix
®
MV-1
™
modutrol assembly is an integrated air
control module designed for dash mounting in a truck/tractor.
The bodies for the modutrol assembly, as well as for the
“spool” inserts, are molded of a nonmetallic, noncorrosive
material. The assembly consists of three push-pull type
valves and two optional lever type valves. All valves utilize a
spool “insert,” which can be replaced from the front of the
assembly without removal of the assembly or connecting
air lines.
The bodies for the modutrol assembly, as well as for the
“spool” inserts, are molded of a nonmetallic, noncorrosive
material. The assembly consists of three push-pull type
valves and two optional lever type valves. All valves utilize a
spool “insert,” which can be replaced from the front of the
assembly without removal of the assembly or connecting
air lines.
The three push-pull type valves provide the following functions:
1. Tractor protection control.
2. Trailer service air supply.
3. System park.
4. Trailer park only.
5. Trailer recharge with tractor spring brakes applied.
Reference Figs. 1 & 5, valves V-1 and V-2 utilize identical
spool “inserts.” The functions of valves V-1 and V-2 are
essentially the same as the Bendix
spool “inserts.” The functions of valves V-1 and V-2 are
essentially the same as the Bendix
®
PP-1
™
control valve.
Valve V-3 utilizes a spool “insert” consisting of two valves; a
nonautomatic push-pull function similar to that of the Bendix
nonautomatic push-pull function similar to that of the Bendix
®
PP-8
™
valve, and a pilot operated three-way valve similar to
that of the Bendix
®
SV-1
™
valve.
VALVE B
VALVE A
VALVE C
5-3/8”
VALVE D
VALVE E
FIGURE 1 - MV-1
™
MODUTROL