BENDIX SD-13-4834 Manuel D’Utilisation

BW2189 © 2006 Bendix Commercial Vehicle Systems LLC All Rights Reserved.  7/2006 Printed in U.S.A. 

Chart 13 designates the revision level of EC-30T

™

 controller hardware, software and features, at the time it was manufactured.  

If your EC-30T

™

 controller has a revision level prior to a specifi c feature introduction, it may not contain that feature.  The 

EC-30T

™

 controller can be upgraded with newer versions of software to include additional features.  Newer software 

is downloaded into the EC-30T

™

 controller  using the Bendix ABS Diagnostic Software.  In cases where an EC-30T

™

 

controller has previously been upgraded with newer software, the software and hardware revisions may not match chart 
13.  For more information, contact Bendix or refer to your local authorized Bendix dealer.

P/N:  5004358-R04
SERIAL:  G002869
REF:  12207569

 

   EC-30T CAPABLE OF:  4S2M, 2S2M, 2S1M, J1587, PLC 

ONE OR MORE U.S. PATENTS APPLY:  4837552

ECU Part Number 

Serial Number

Hardware Revision Number

Hardware Capabilities

The label shown in Figure 20 is located on the side of the EC-30T

™

 ABS controller ECU.  The ECU part number, hardware 

revision number, serial number and hardware capabilities can be found on this label.  The complete MC-30

™

 controller 

assembly part number is designated with a separate label.  If the part number label is not readable or is painted over, 
the ECU part number and revision can be read using a diagnostic tool.

The software revision number can be read using a diagnostic tool.

Please visit Bendix.com to ensure you have the latest version of this document.

  ECU Hardware 

 

R02 

BW-363-CD R02  Initial Production Release

 

R03 

BW-363-CD R03  No Features Added

 R04  BW-363-CD 

R04 

Self-Confi guration

  

  Odometer

 

 

 

Calibration of Non-Standard Wheel Sizes