Bühler 2895 Manuel D’Utilisation

bühler

Allied Front-End Loader 

When loading bales onto a trailer, park trailer 

s you lift the bale using the regular loader, it 

in close proximity to minimize turning angle 
and length of travel to increase loading
efficiency.

A
is recommended to feather the valve to allow
bucket cylinders to extend to keep bale at
about a 20

q angle.  (On TSL loaders this is

not necessary)  Lift the bale only enough to 
clear the area that the bale will be placed on. 
Always approach the trailer square to the 
tractor as shown. 

Avoid

nd sharp turns. Avoid uneven terrain areas for loading and 

sudden stops a

unloading.

fter setting the bale down position the A –

ith pallet forks level and just above the 

A
frame with spear(s) horizontal to the ground 
and slowly back the tractor straight out. 

W
ground, drive the forks

into

the

pallet

completely.  Raise loader to lift pallet and
carry level 6 to 12 inches off the ground. 

Avoid

nd sharp turns. Operate at low ground speeds.  Never

sudden stops a

attempt to lift loads heavier than the rated fork specs (42”– 2200 lbs.) (48”– 4400 
lbs.).  Always lift or carry pallets using both forks and utilizing the full length of the 
forks.

- 16 - 

P4110

When driving amongst livestock keep bucket cylinders retracted, and loader
boom at least 6 to 7’ off the ground.  Store A – frame away from both play and 
heavy traffic areas. 

Level indicator