Whirlpool GY397LXUQ Guide D’Installation Rapide

5. Slide range back so the rear range foot is inserted into the 

slot of the anti-tip bracket.

IMPORTANT: If the back of the range is more than 2" (5.1 cm) 
from the mounting wall, the rear range foot may not engage the 
bracket. Slide the range forward and determine if there is an 
obstruction between the range and the mounting wall. If you 
need assistance or service, refer to the “Assistance or Service” 
section of the Use and Care Guide, or the cover or “Warranty” 
section of the User Instructions, for contact information.

6. Repeat steps 1 and 2 to ensure that the range foot is 

engaged in the anti-tip bracket.

If the rear of the range lifts more than ½" (1.3 cm) off the floor 
without resistance, the anti-tip bracket may not be installed 
correctly. Do not operate the range without anti-tip bracket 
installed and engaged. Please reference the “Assistance or 
Service” section of the Use and Care Guide, or the cover or 
“Warranty” section of the User Instructions, to contact 
service.

1. Place rack in oven. 

2. Place level on rack and check levelness of range, first side to 

side; then front to back.

3. If range is not level, pull range forward until rear leveling leg is 

removed from the anti-tip bracket.

4. Use wrench to adjust leveling legs up or down until range is 

level. Push range back into position.

5. Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance.

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. Check that the range is level. See “Level Range.”

5. Use a mild solution of liquid household cleaner and warm 

water to remove waxy residue caused by shipping material. 
Dry thoroughly with a soft cloth. For more information, read 
the “Range Care” section of the Use and Care Guide or User 
Instructions.

6. Read the “Range Use” section in the range Use and Care 

Guide or User Instructions.

7. Reconnect power.

8. Plug power cord into appropriate outlet (for ranges with 

power supply cord). Slide range into its final location. 

9. Replace storage drawer (warming drawer on some models).

10. Turn on surface burners and oven. See the Use and Care 

Guide or User Instructions for specific instruction on range 
operation. 

■

Household fuse is intact and tight; or circuit breaker has not 
tripped.

■

Range is plugged into a grounded outlet.

■

Electrical supply is connected.

■

See the “Troubleshooting” section in the Use and Care Guide 
or User Instructions.

When the range has been on for 5 minutes, check for heat. If 
range is cold, turn off the range and contact a qualified 
technician.

Please reference the “Assistance or Service” section of the Use 
and Care Guide, or the cover of the User Instructions, or contact 
the dealer from whom you purchased your range.