Manualsbrain.com
  1. Manuels
  2. Marques
  3. Westinghouse
  4. CSA (Canada) WHC6500E CSA MODEL
  5. Manuel Du Propriétaire

Westinghouse CSA (Canada) WHC6500E CSA MODEL Manuel Du Propriétaire

Télécharger
Page de 76
   
15
ASSEMBLY
INSTALLING THE BATTERY 
(ELECTRIC START 
GENERATORS ONLY)
!
 WARNING
To avoid electric shock:
•  
ALWAYS connect the positive (+) 
battery wire (red boot) first when 
connecting battery wires.
•  
ALWAYS disconnect the negative (-) 
battery wire (black boot) first when 
disconnecting battery wires.
•  
NEVER connect the negative (-) 
battery wire (black boot) to the 
positive (+) post on the battery.
•  
NEVER connect the positive (+) 
battery wire (red boot) to the negative 
(-) post on the battery.
•  
NEVER touch both battery posts 
simultaneously.
•  
NEVER place a metal tool across 
both battery posts.
•  
ALWAYS use insulated or non-
conducting tools when installing the 
battery.
OTE:
N
The generator comes equipped with the 
positive battery wire (red boot) already 
attached.
1.  Verify the positive (+) battery wire (red boot) is 
securely tightened to the positive (+) battery post. 
Make sure boot is over battery post.
2.  Carefully remove the protective wrapping around 
the lug of the negative (-) battery wire (black boot). 
3.  Locate negative (-) cable attached to alternator 
cable, remove tie and route to the negative (-) 
battery post.
4.  Pull back the black boot and securely attach the 
negative (-) battery wire (black boot) to the negative 
(-) battery post as shown in Figure 8. Replace the 
black boot so it protects the wire lug and battery 
post.
1
2
Figure 8 – Attaching the Negative (-) Battery Wire 
(Black)
1 -   Positive (+) 
Battery Cable 
(Red)
2 -   Negative (-) 
Battery Cable 
(Black)