Brother 660MC Manuel D’Utilisation
14 - 4
S E T T I N G U P T H E M F C 6 6 0 M C A N D C O M P U T E R T O W O R K T O G E T H E R
Installing the Multi-Function Link
®
Software
Make sure your MFC 660MC is connected to your PC as described earlier and that
both machines are plugged in and switched on.
both machines are plugged in and switched on.
Overview of Basic Steps
1
Insert the Brother CD-ROM into your CD-ROM drive and access the Installation
Window.
Window.
2
Enter the command for your version of Windows
®
, if needed.
3
Select the option Install Multi-Function Link
®
Software.
4
Follow the installation instructions.
Installing the Brother Software
1
Insert the Brother CD-ROM into your CD-ROM drive.
2
After you insert the Brother CD-ROM, you must type the appropriate command for
your version of Windows
your version of Windows
®
, if needed:
• If you are using Windows
®
3.1x, from the Program Manager: Click File, then Run,
then type x:SETUP.EXE. (“x” is the drive letter for your CD-ROM drive.) This will
start the Software Installation program.
start the Software Installation program.
• If you are using Windows
®
95/98 or Windows NT
®
Workstation Version 4.0, the
Software Installation program appears automatically when you insert the Brother
CD-ROM.
CD-ROM.
• For Windows
®
95/98 and Windows NT
®
Workstation Version 4.0, you can also click
Start at the Desktop, select Run and then enter x:\SETUP.EXE. (“x” is the drive letter
for your CD-ROM drive.)
for your CD-ROM drive.)
The Brother LOGO will be displayed on the screen.
IMPORTANT
To install the software using Windows NT Workstation
Version 4.0, you must be logged on as the Administrator.
Version 4.0, you must be logged on as the Administrator.
R