Brother FAX1570MC Manuel D’Utilisation
15
I N S T A L L A T I O N
Do not connect a TAD elsewhere on the same phone line—your FAX/MFC and
TAD will both try to control the line.
TAD will both try to control the line.
Connections
The external TAD must be plugged into the left side of the FAX/MFC, into the jack labeled
EXT. Your FAX/MFC cannot work properly if you plug the TAD into a wall jack.
EXT. Your FAX/MFC cannot work properly if you plug the TAD into a wall jack.
1
Plug the telephone line cord from the wall jack into the left side of the FAX/
MFC, in the jack labeled LINE.
MFC, in the jack labeled LINE.
2
Plug the telephone line cord from your TAD into the left side of the FAX/MFC,
in the jack labeled EXT. (Make sure this cord is connected to the TAD at the
TAD’s telephone line jack, and not its telephone set jack.)
in the jack labeled EXT. (Make sure this cord is connected to the TAD at the
TAD’s telephone line jack, and not its telephone set jack.)
3
Set your external TAD to 4 rings or less. (The FAX/MFC’s Ring Delay setting
does not apply).
does not apply).
4
Record the outgoing message (see below).
5
Set the TAD to answer calls.
6
Set Message Storage (
Function
,
8
,
1
) to VOICE:EXT..
7
Set the Answer Mode to MC:MSG CTR.