Wacom Cintiq DTK-2100 Manuel D’Utilisation

Troubleshooting

Page  45

TESTING THE TOUCH STRIPS

1.

With the D

IAGNOSTICS

 dialog box open, observe the T

ABLET

 I

NFO

 column as you test each Touch 

Strip.  If you have more than one Cintiq unit connected to your system, be sure you have selected 
the unit you are testing from the T

ABLET

 I

NFO

 column.

2.

Slide your finger up or down along the entire length of the Touch Strip you want to test.  As you 
touch and move your finger along the Touch Strip, a number will indicate the current finger 
position for the respective Touch Strip next to L

EFT

 T

OUCH

 S

TRIP

 or R

IGHT

 T

OUCH

 S

TRIP

.

3.

Press the corresponding Touch Toggle button for the Touch Strip you are testing.  This will toggle 
between the four customizable states of the Touch Strip.  As you cycle between settings, a 
corresponding LED should illuminate.  Within the D

IAGNOSTICS

 dialog box, the button state should 

also be shown.

If any of the functions are set to S

KIP

, the corresponding LED will be skipped in the toggle 

sequence.

4.

When you are done, click the C

LOSE

 button to exit the dialog box.

Important: Remember that some applications can override and control the Touch Strip functions.  

Consider closing any open applications except the Wacom Tablet control panel when testing 
the Touch Strips.