Stamina Products Stamina Products, Inc Rowing Machine 35-1399 Manuel D’Utilisation

Page de 22
The safety and integrity designed into the 
1399 AIR ROWER can only be maintained when the 1399 AIR 
ROWER is regularly examined for damage and wear. Special attention should be given to the following:
1.  Sit on the 
SEAT(66) and pull on the HANDLEBAR(16) to verify that the Fan System provides resistance 
and the Seat travel is smooth and stable.
2.  Clean the roller tracks on the 
RAIL(2) with an absorbent cloth.
3.  Verify that the 
WARNING LABEL(105) is in place and easy to read. Call Stamina Products immediately 
at 
1-800-375-7520 for a replacement WARNING LABEL(105) if it is missing or damaged.
4.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.  Worn or damaged components shall be replaced immediately or the 
1399 AIR ROWER removed from 
service until repair is made.
6.  Only Stamina Products supplied components shall be used to maintain/repair the 
1399 AIR ROWER.
7.  Keep your 
1399 AIR ROWER clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
13
Lifting the
RAIL(2) slightly
1.  To store the 
1399 Air Rower, simply keep it in a clean dry place.
2.  To avoid damage to the electronics, remove the batteries before storing the 
1399 Air Rower for one 
year or more.
3.  Move the 
1399 Air Rower with the moving wheels on the FRONT STABILIZER(7). Grasp and lift 
the 
REAR STAND(3) to move the 1399 Air Rower. Do not use the SEAT(66) to move the 1399 Air 
Rower. The SEAT(66) will move and the SEAT CARRIAGE(4) may pinch your hand or fingers.
4.  Follow this process as described and illustrated to fold the 
1399 Air Rower for easy storage.
a.  Remove the 
PULL PINS(54) from the MAIN FRAME(1).
  NOTE: Lifting the RAIL(2) slightly will make it easier to remove the PULL PINS(54).
b.  Fold the 
RAIL(2) upward. Secure the RAIL(2) in folded position by inserting a PULL PIN(54) into 
the 
RAIL(2) at position A.
c.  Insert another 
PULL PIN(54) into the lower end of the RAIL(2) at B for storage.
B
A