Southbend SB1023 Manuel D’Utilisation

-20-

For Machines Mfg. Since 8/09

Model SB1023

If you must conduct a ring test, the grinding 

wheel must be removed and reinstalled onto the 

hub. However, when doing this, remember that 

overtightening or rotating the spanner nut in the 

incorrect direction can damage threads, crack 

the grinding wheel, and make grinding wheel 

removal more difficult than necessary.

1.  DISCONNECT MACHINE FROM POWER!

2.  Place a sheet of plywood on top of the table 

to protect the table (Figure 12), and open 

the grinding wheel cover.

3.  Position a 12mm wrench on the spindle shaft 

that protrudes from the motor fan cover 

(Figure 13).

5.  Using the wrenches, loosen the spanner nut 

in the direction shown in Figure 15.

6.  Unthread the spanner nut (Figure 16).

4.  Position the spanner wrench on the spanner 

nut (Figure 14).