Southbend SB1023 Manuel D’Utilisation

For Machines Mfg. Since 8/09

Model SB1023

-23-

7.  Oil the threads and thread the hub puller 

(Figure 25) into the hub until it stops.

8.  While holding the wheel and hub from 

sliding off of the spindle, tighten the hub 

puller bolt until the wheel and hub assembly 

are pulled off the spindle as shown in 

Figure 26.

6.  Remove the spindle bolt (Figure 24).

4.  Position a 12mm open end wrench on the 

spindle shaft that protrudes from the motor 

fan cover (Figure 22).

5.  Using the wrenches, turn the spindle bolt 

clockwise as shown in Figure 23.