Rane Advanced 24-Bit USB 2.0 Interface for Professional DJs SL3 Manuel D’Utilisation
GOOD SiGnAL - Clean signal with 100% tracking.
CD PLAYeR inTO PHOnO inPUT - Scratch Live is set
to receive phono level input. Set to the correct value in
the setup menu.
to receive phono level input. Set to the correct value in
the setup menu.
UneARTHeD -
Very susceptible to interference.
Attach the turntable’s ground wire.
nO SiGnAL - Scratch Live is not receiving any control
signal - check your connections.
signal - check your connections.
PHOnO inTO Line inPUT - Scratch Live is set to
receive line level input. Set to the correct value in the
setup menu.
receive line level input. Set to the correct value in the
setup menu.
USinG PiGGYBACk CABLeS - Picking up huge
amounts of noise, barely tracking. Connect your
turntables directly to the hardware.
amounts of noise, barely tracking. Connect your
turntables directly to the hardware.
BAD TURnTABLe viBRATiOn - Bass is reaching the
stylus. Try to isolate the turntable from the speakers.
stylus. Try to isolate the turntable from the speakers.
DUSTY neeDLe - Dust is preventing the stylus from
tracking the groove correctly. Clean your needle and the
control vinyl.
tracking the groove correctly. Clean your needle and the
control vinyl.
DAMAGeD neeDLe - Try re-seating, cleaning or
replacing your stylus.
replacing your stylus.
SCOPe ReADinG AnD FiXeS
Most of the problems that occur with Scratch Live can be attributed to it not getting a good reading of the control signal from your records or CDs. These examples show what the scopes on the
setup screen can look like to help solve possible problems. Some problems cause similar looking scopes, e.g., if your scopes look like the Dusty Needle one, the cause could be a damaged needle.
setup screen can look like to help solve possible problems. Some problems cause similar looking scopes, e.g., if your scopes look like the Dusty Needle one, the cause could be a damaged needle.
RANE SL 3
FOR
SERATO SCRATCH LIVE •
OPERATOR’S MANUAL
1.9
32