Harbor Freight Tools 3 CFM Two Stage Vacuum Pump Manuel Du Produit
Page 7
For technical questions, please call 1-800-444-3353.
Item 61176
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
Inlet
Fittings
Switch
(hidden from
this angle)
Oil Fill
plug
Oil Drain
plug
Oil Sight
Glass
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Tool Set Up
1. Before operating the Vacuum Pump,
check the oil level by placing the
Vacuum Pump on a flat, level surface.
Observe the Oil Sight Glass. The oil should
be at the fill line on the Oil Sight Glass.
2. If oil is needed, unscrew the Oil Fill Plug and
add oil through the hole under the fitting.
Use a low viscosity vacuum pump oil
(i.e., HFV-46).
3. Inspect the sealing “O” Ring each time the
Oil Fill Plug is removed. Look for possible
tears, cracks, or damage. Replace if needed.
4. Replace the Oil Fill Plug and
tighten securely to prevent oil from
escaping under pressure during use.
Op
ERA
TION