Chaparral VFS113 Manuel D’Utilisation
Configuring the Router
3-9
To change the Loop ID:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Host Configuration and press Enter.
The Host Configuration screen displays.
3
Select the topology you want and press Enter, or press Enter if the correct topology
is already selected.
is already selected.
The current setting is marked with an * next to it. For information about the topology
selection, see
selection, see
.
The Loop ID screen displays if Loop Topology was selected.
4
Select the option or number you want to use and press Enter.
The Router LUN screen displays. The text inside the parenthesis ( ) shows the current
Router LUN.
Router LUN.
To
Do this
Let the FC loop initialization process
determine the Loop ID each time the
router powers up
determine the Loop ID each time the
router powers up
I
Select SOFT and press Enter.
This is the default setting
Keep the same Loop ID for the router
at all times
at all times
I
Select the [Loop ID] you want to use
and press Enter.
and press Enter.
This can be any number from 0 to 125.
Note: See
for more details on
how the value selected for the Loop ID will correspond to the AL_PA.