Chaparral VFS113 Manuel D’Utilisation
VFS113 Rack/Desktop Model User’s Guide
D-6
Table D-2 describes the settings you can change here.
SNMP Configuration Screen
Option 3 from the Network Management System Console screen displays the SNMP
Configuration screen.
Configuration screen.
Table D-3 describes the settings you can change here.
Table D-2. System Configuration screen settings
Option
Setting
Description
1
IP Address
Internet Protocol address of the router. Default is 10.0.0.1.
2
IP Mask
Subnet mask. Default is 255.255.255.0.
3
Gateway
Default is 0.0.0.0. See your network administrator for more
information.
information.
4
DHCP Enabled?
Yes or No toggle that enables or disables DHCP. Default is No
(disabled).
(disabled).
ESC
Exit
Saves all changes and returns to the Network Management
System Console screen
System Console screen
Note: Before choosing to enable DHCP, contact your network
administrator and make sure you have support for identifying IP hardware
and name server addresses.
administrator and make sure you have support for identifying IP hardware
and name server addresses.
Table D-3. System Configuration screen settings
Option
Setting
Description
1
SNMP Trap Host
Host computer’s IP address that is set up to receive SNMP
traps. Default is 0.0.0.0.
traps. Default is 0.0.0.0.
2
SNMP Traps
Enabled?
Enabled?
On or off toggle to enable SNMP traps. Default is No
(disabled).
(disabled).
3
Read Community
SNMP read password. Default is Public.