Yamaha Add-On Effects four language Guide De Montage

Select [De-authorize], then [Have already 
created unregistration code], then click [Next].
The following window opens.

Click [Read from file] to read the text file saved 
in Step 12.
If you wrote down the PRODUCT ID and unregistration 
code on a piece of paper, enter the ID and code from the 
keyboard.

Make sure that the correct PRODUCT ID and 
unregistration code are displayed, then click 
[Next].
The “Start de-authorizing” message is displayed.

Make sure that you are prepared to access the 
Internet, then click [Next].
The computer connects to the authentication server and 
de-authorizes the license.

The de-authorization is now complete. You can now install 
the software on another console.

• Access key is wrong.
→ Make sure that you have entered the correct PRODUCT 

ID, registration code, unregistration code, or access key.

• Content of the file is not correct data.
→ Make sure that the text file contains the registration code, 

unregistration code, or access key. The file may have been 
corrupted. Save the file again.

• Unable to connect to the console.
→ Make sure that the power to the console is turned on and 

that the console and the computer are connected via the 
USB cable. If the console is in normal operation mode, 
follow Step 2 on page 5 to place the console in Flash 
Update mode. If the error persists, turn off and on the 
power to the console and restart the installer.

→ To cancel installation, click [Do not install]. To install 

and overwrite the current software, click [Reinstall]. 
Cancel installation if there is no problem in operating the 
console.

• This application is not compatible with the console.
→ Your console does not support this Add-On Effects 

package. Make sure that the console’s system software is 
version 2.0 or later (You don’t need to check this on the 
PM5D). The required system software version, however, 
is different for each Add-On Effects package.
Updating the system software to the latest version may 
enable you to install and use this Add-On Effects package.

• Failed to create registration code.
→ Install the software again.
• Unable to initialize license management information 

→ Make sure that you are installing the software in the 

console for which you obtained the registration code, 
then try to install the software again.

• Access key cannot be written to console.
→ Make sure that the PRODUCT ID and access key are 

correct, then try to install again.