ZyXEL STB-1001S2 Manuel D’Utilisation
Chapter 1 Introducing the STB
STB-1001S2 User’s Guide
19
Figure 3 Rear Panel Connections
1.4 Resetting the STB
To reset the STB to its factory defaults, use the System Setup menu (see
).
Table 2 Rear Panel Connections
LABEL
DESCRIPTION
ON/OFF
Use this switch to turn the STB on or off.
POWER
Connect this port to a suitable power supply using the provided adaptor.
USB
Use this port to connect to a USB keyboard (not supplied).
LAN
Use this Ethernet port to connect the STB to your Internet access device or
network.
network.
S/PDIF
Use this port to connect the STB to an S/PDIF (Sony / Philips Digital Interface
Format) audio device.
Format) audio device.
CVBS
Use this composite video RCA connector to connect the STB to your TV’s
analog video input (usually colored yellow).
The composite video connector does not carry audio. You must also connect
your TV to one of the STB’s audio connectors.
analog video input (usually colored yellow).
The composite video connector does not carry audio. You must also connect
your TV to one of the STB’s audio connectors.
L, R
Use these to connect the STB to your audio device’s analog audio inputs.
L: The white RCA connector carries the stereo audio signal (left channel).
R: The red RCA connector carries the stereo audio signal (right channel).
L: The white RCA connector carries the stereo audio signal (left channel).
R: The red RCA connector carries the stereo audio signal (right channel).