ZyXEL STB-1001S2 Manuel D’Utilisation

 Chapter 2 The Menu System

STB-1001S2 User’s Guide

Select PPPoE in the Network menu. The following menu displays. 

Figure 14   The Network: PPPoE Menu

The following table describes the labels in this menu that were not already described in table 

.

Use this menu to get new firmware from the autoconfiguration server. You must be connected 
to the network and have a valid autoconfiguration server address configured in the Advanced 
Setup: Network menu’s ACS Server field (see 

Select Firmware Upgrade from the column on the left of the screen. The following menu 
displays.

Figure 15   The Firmware Upgrade Menu

Table 9   The Network: PPPoE Menu

Mode

Select PPPoE to use a Point-to-Point Protocol over Ethernet 
service.

User Name

Enter the username for your PPPoE account.

Password

Enter the password for your PPPoE account.